DEE 1521, DEE 2127
Support the device on the cold water accessory to
make it easier to mark the wall (B).
Mark the drill hole (C). Make sure that the device is
straight and aligned vertically.
Separate the parts for attaching the device.
Drill marking, insert dowel and screw the device
mounting parts onto the wall.
www.dimplex.de
C
B
6721873500 (2023/07)
Mount the rear of the device onto the wall.
4.6
Cable entry, device alignment
The power supply line can be inserted at three differ-
ent positions:
a. upper connection
b. lower connection
c. lower connection for short cables
Possible positions for cable entry
English
EN-11