Table of Contents
Advertisement
06
Disc playback
Advanced CD or MP3/WMA disc
playback
STANDBY/ON
CD
USB
TUNER
iPod
BT AUDIO
AUDIO IN
1
2
3
4
5
6
7
8
9
CLEAR
REPEAT
0
DISPLAY
TUNE+
Direct track search
By using the numeric buttons, the desired tracks on the
current disc can be played.
Use the numeric buttons on the remote control to
select the desired track while playing the selected
disc.
Note
• A track number higher than the number of tracks on the
disc cannot be selected.
To stop playback:
Press .
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press REPEAT repeatedly until "RPT ONE" appears. Press
ENTER.
To repeat all tracks:
Press REPEAT repeatedly until "RPT ALL" appears. Press
ENTER.
To repeat desired tracks:
Perform steps 1 to 5 in "Programmed play (CD or MP3/WMA)"
section on this page and then press REPEAT repeatedly until
"RPT ALL" appears. Press ENTER.
To cancel repeat play:
Press REPEAT repeatedly until "RPT OFF" appears. Press
ENTER.
Note
• After performing repeat play, be sure to press .
Otherwise, the disc will play continuously.
• During repeat play, random play is not possible.
18
En
0
CLOCK
DISPLAY
FOLDER
TUNE+
TIMER
SLEEP
ENTER
MEMORY
EQUALIZER
MENU
/PROGRAM
P.BASS
PRESET
VOLUME
TUNE–
+
+
BASS/TREBLE
MUTE
–
–
RANDOM
DIMMER
FOLDER
RDS
ST/MONO
ASPM
PTY
DISPLAY
• When random play is set up during repeat play, the
repeat play will be canceled.
Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press RANDOM repeatedly until "RDM ON" appears. Press
ENTER.
To cancel random play:
Press RANDOM repeatedly until "RDM OFF" appears. Press
ENTER.
Note
• In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
• During random play, repeat play is not possible.
• When repeat play is set up during random play, random
play will be canceled.
Programmed play (CD or MP3/WMA)
You can choose up to 32 selections for playback in the order
you like.
1
While in the stop mode, press MEMORY/
PROGRAM on the remote control to enter the
programming save mode.
Press or the numeric buttons on the
2
remote control to select the desired tracks.
3
Press ENTER to save folder and track
number.
4
Repeat steps 2 to 3 for other folder/tracks.
Up to 32 tracks can be programmed.
• If you want to check the programmed tracks, press
MEMORY/PROGRAM.
• If you make a mistake, the last programmed tracks will
be canceled by pressing CLEAR.
Press to start playback.
5
To cancel the programmed play mode:
To cancel the programmed play, press twice on the remote
control. The display will show "PRG CLR" and all the
programmed content will be cleared.
Adding tracks to the program:
Press the MEMORY/PROGRAM. Then follow steps 2 to 3 to
add tracks.
Note
• When a disc is ejected anything programmed is cleared.
Advertisement
Table of Contents
