Vivo PP-DK30B-1 Instruction Manual
Vivo PP-DK30B-1 Instruction Manual

Vivo PP-DK30B-1 Instruction Manual

Black clamp-on pegboard panel
Hide thumbs Also See for PP-DK30B-1:

Advertisement

Quick Links

Black Clamp-on Pegboard Panel
Instruction Manual
SKU: PP-DK30B-1
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/pp-dk12b
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PP-DK30B-1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vivo PP-DK30B-1

  • Page 1 Black Clamp-on Pegboard Panel Instruction Manual SKU: PP-DK30B-1 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/pp-dk12b GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
  • Page 2: Package Contents

    WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury.
  • Page 3: Assembly Options

    ASSEMBLY OPTIONS: Option A: Above Desk Mounting Page 4 Option B: Below Desk Cable Management Page 9...
  • Page 4: Pre-Assembly

    ASSEMBLY OPTION A: Above Desk Mounting Pre-Assembly 0 - 2" / 0 - 51mm Desktop Thickness: No pre-assembly required. Proceed to STEP 1. 1.1 - 3" / 28 - 77mm Desktop Thick: Follow steps below. 1. Use a Phillips screwdriver to remove screws separate Lower Clamp (A1) from Support (A).
  • Page 5 STEP 1 Connect Pegboard (B) to Supports (A) by installing M6x16mm Screws (S-A) and M6 Washer (S-B) through pegboard into threaded holes of Supports (A) using 4mm Allen Wrench (T-A). This can be done in a portrait or landscape orientation. See examples below. Orientation Options Portrait Landscape...
  • Page 6 STEP 2 Install Clamp Pads (D) on the Clamps (A1) on Supports (A). Tighten Clamps (A1) to attach to desired surface. Use Zip Ties (E) to secure cables along Supports (A).
  • Page 7 STEP 3 Install accessories (C, F thru J) onto assembled pegboard. See images on next page for placement.
  • Page 8: Accessory Placement

    Accessory Placement Hooks (H) Shelf (C,F) Place Hooks (H) into Place Shelf Brackets (F) desried pegboard holes. onto desired location on pegboard. Place Shelf (C) onto Shelf Brackets (F). Loops (G) Place Loops (G) into desired pegboard holes. Magnets Clips (J) and Magnets (I) can be used as desired on pegboard.
  • Page 9 ASSEMBLY OPTION B: Below Desk Cable Management STEP 1 To mount belowdesktop, the Clamp on Supports (A) will first need to be removed. The Clamp will be re-installed to the pegboard and used to secure pegboard below desktop. DISASSEMBLE SUPPORTS (A): Remove M6x6mm Screws (A2) and M6x8mm Screws (A3) from Clamp (A1) to remove Clamp Bolt (A4) using 4mm Allen Wrench (T-A).
  • Page 10 STEP 2 Connect Clamp Bolt (A4) to Clamp (A1) using previously removed M6x8mm Screws (A3) and 4mm Allen Wrench (T-A). Connect Pegboard (B) to front of Clamps (A1) using previously removed M6x6mm Screws (A2).
  • Page 11 STEP 3 Secure Clamp (A1) to desktop surface. Zip Ties (E) can be used to manage cables on assembled pegboard.
  • Page 12 : 1HR 8M (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...

Table of Contents