Advertisement
Quick Links
Black Clamp-on Pegboard Panel
Instruction Manual
SKU: PP-DK30B-1
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/pp-dk12b
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Related Manuals for Vivo PP-DK30B-1
Summary of Contents for Vivo PP-DK30B-1
- Page 1 Black Clamp-on Pegboard Panel Instruction Manual SKU: PP-DK30B-1 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/pp-dk12b GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. - Page 3 ASSEMBLY OPTION A: Above Desk Mounting STEP 1 Connect Pegboard (B) to Supports (A) by installing M6x16mm Screws (S-A) and M6 Washer (S-B) through pegboard into threaded holes of Supports (A) using 4mm Allen Wrench (T-A). This can be done in a portrait or landscape orientation.
- Page 4 STEP 2 Install Clamp Pads (D) on the Clamps (A1) on Supports (A). Tighten Clamps (A1) to attach to desired surface. Use Zip Ties (E) to secure cables along Supports (A).
- Page 5 STEP 3 Install accessories (C, F thru J) onto assembled pegboard. Loops (G) Hooks (H) Shelf (C,F) Place Loops (G) into Place Hooks (H) into Place Shelf Brackets (F) desired pegboard holes. desried pegboard holes. onto desired location on pegboard. Place Shelf (C) onto Shelf Brackets (F).
- Page 6 ASSEMBLY OPTION B: Below Desk Cable Management STEP 1 To mount belowdesktop, the Clamp on Supports (A) will first need to be removed. The Clamp will be re-installed to the pegboard and used to secure pegboard below desktop. DISASSEMBLE SUPPORTS (A): Remove M6x6mm Screws (A2) and M6x8mm Screws (A3) from Clamp (A1) to remove Clamp Bolt (A4) using 4mm Allen Wrench (T-A).
- Page 7 STEP 2 Connect Clamp Bolt (A4) to Clamp (A1) using previously removed M6x8mm Screws (A3) and 4mm Allen Wrench (T-A). Connect Pegboard (B) to front of Clamps (A1) using previously removed M6x6mm Screws (A2). Secure Clamp (A1) to desktop surface. Zip Ties (E) can be used to manage cables on assembled pegboard.
- Page 8 : 1HR 8M (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the PP-DK30B-1 and is the answer not in the manual?
Questions and answers