H3C WX3820X Installation Manual page 52

6
LEDs
LEDs
Figure6-1 LEDs
(1) 100/1000BASE-T autosensing Ethernet port LEDs
(3) Power module LED (PWR1)
(5) System status LED (SYS)
(7) Expansion module status LED (SLOT2)
(9) 100/1000BASE-T out-of-band management Ethernet port status LED (LINK/ACT)
LED description
Table6-1 LED description
LED
Power module LED
System status LED
Expansion module
status LED
Mark Status
Steady green
PWR1
Steady red
PWR2
Off
Slow flashing green
(once every 2
seconds)
Fast flashing green
(four times per
SYS
second)
Steady red
Off
Steady green
SLOT1
SLOT2
Steady red
6-1
(2) 1000BASE-X SFP port LED
(4) Power module LED (PWR2)
(6) Expansion module status LED (SLOT1)
(8) Expansion module status LED (SLOT3)
Description
The power module is operating correctly.
An exception has occurred on the power
module.
No power module is present.
The device is operating correctly.
The device is starting up.
The device has failed self-POST or other
severe issues were detected.
No power is input.
The expansion module is in position.
An error has occurred on the expansion
module.