Toro 30631 Operator's Manual page 12

4-wheel drive traction unit
Hide thumbs Also See for 30631:
Table of Contents

Advertisement

Interlock Switches
Instrument Panel
and Controls
Power Take-Off Drive
Implement Lift
Dimensions and Weights (approx.)
Width:
Length:
Height:
w/roll-over protection system:
Dry Weight:
Wheel Base:
Optional Equipment
72" Side Discharge Cutting Unit
72" Rear Discharge Cutting Unit
72" Flex Deck Cutting Unit
Guardian 72 , Recycler Cutting Unit
Cushion Seat
Deluxe Suspension Seat Kit (requires
Model No. 30628)
Seat Adapter Kit
Armrest Kit
Speed Control Kit
48 in. V-Plow (requires
Model No. 30757)
V-Plow Mounting Kit
(without tire chains)
Debris Blower
Spark Arrestor Screen
Rotary Broom
Quick Attach Receiver Kit
(for traction unit)
Quick Attach (for Guardian 72 , Recycler Model No. 30729
Cutting Unit, Model No. 30716
Quick Attach (for 72" Side Discharge
Cutting Unit, Model No. 30722,
72" Rear Discharge Cutting Unit,
Power take off switch—shuts the engine off when the power take off is engaged with no operator
on the seat. Traction switch—shuts the engine off when the traction pedal is engaged with no
operator on the seat. Seat switch—shuts the engine off if operator leaves the seat without
disengaging the power take off and/or traction pedal. The engine will not start if the power take
off or traction pedal is engaged. Brake switch–shuts the engine off when the power take off or
traction pedal is engaged with the parking brake set.
Hour meter, fuel gauge, ignition switch, oil pressure warning light, charge indicator, ignition,
engine coolant temperature warning light, temperature gauge, temperature override switch, glow
plug indicator light, and throttle control are on instrument panel. Hand-operated power take-off
lever is located the right of the seat. Traction pedal for traction operation at the right of the
steering column.
Driven by a belt directly from the engine's output shaft. It is clutched by pivoting the shaft
support with a hand-operated lever. Power take-off speed is 1810 rpm@3200 rpm engine speed.
The implement is connected with a high-quality universal joint.
Cutting unit or the implement is lifted by a hydraulic cylinder that has 2-
1
in. (82 mm) stroke.
4
46 in. (117 cm)
91 in. (231 cm)
50 in. (127 cm)
78.5 in. (199 cm)
1250 lb. (567 kg)
49 in. (124 cm)
Model No. 30722
Model No. 30710
Model No. 30799
Model No. 30716
Model No. 30623
Model No. 30625
Model No. 30628
Model No. 30707
Model No. 30677
Model No. 30750
Model No. 30757
Model No. 30855
Part No. 75-6880
Model No. 30743
Model No. 30711
Model No. 30719
Model No. 30710 and Rotary Broom,
Model No. 30743)
Tire Chains (front) (set of 2)
Wheel Weight Kit (set of 2)
Rear Weight Kit (set of 2)
Rear Weight Kit (set of 1)
4-Ply Wide Tire w/Rim, 23 x 10.5 x
12 (2 required; will not fit with
72" Rear Discharge Deck,
Model No. 30710)
6-Ply Wide Tire w/Rim 23 x 10.5 x
12 (2 required; will not fit with
72" Rear Discharge Deck,
Model No. 30710
Jack Pad Kit
12
1
in. (64 mm) bore and 3-
2
Part No. 11-0390
Part No. 11-0440
Part No. 24-5780
Part No. 24-5790
Part No. 69-9870
Part No. 62-7020
Part No. 76-0900

Advertisement

Table of Contents
loading

This manual is also suitable for:

Groundsmaster 328-d

Table of Contents