3-6 Removing covers and grilles
Procedure 3-3
Removing the pedestal grilles
Use this procedure to remove the pedestal grilles from modular business
package (MBP) master or expansion cabinets.
Requirements
The following tools and materials are required:
•
•
Action
Step
1
2
3
4
AccessNode P0904244 Issue 1.0
flat blade screwdriver, 1/4 in. blade width
sheets of cardboard or foam on which to rest the equipment covers while
the installation is being performed
Action
Release the two captive screws that hold the pedestal grille in place as shown
in Figure 3-3.
Grasp the top left and top right edges of the grille.
Tilt the grille outward, and lift it up to remove it.
Store the grille on cardboard or foam to protect its finish while you perform the
installation.
—continued—