Ferroli DIVATOP D HF Instructions For Use, Installation & Maintenance page 51

DIVATOP D HF
Room temperature adjustment (with optional room thermostat)
Using the room thermostat, set the temperature required in the rooms. If the room thermostat is not installed, the boiler
will keep the system at the set system delivery setpoint temperature.
Room temperature adjustment (with optional remote timer control)
Using the remote timer control, set the required temperature in the rooms. The boiler will adjust the system water ac-
cording to the required room temperature. For operation with remote timer control, please refer to the relevant instruc-
tion manual.
Hot water tank exclusion (ECO)
Heating/hot water tank temperature maintaining can be excluded by the user. In case of exclusion, hot water will not be
delivered.
The user can deactivate the hot water tank (ECO mode) by pressing the button
In ECO mode the display activates the symbol
To activate COMFORT mode (hot water tank on) press the button
Main menu [MENU]
Press the button
The desired items can be selected with the
To access the menus in the navigation menu [MENU], press the button
• [Service] - Menu reserved for the installer
See "Installer menu [SERVICE]" on page 52.
• [Diagnostic] - Provides information on boiler sta-
tus, in real time.
See "Boiler information menu [Diagnostic]" on
page 52.
• [Counters] - Boiler counters.
See "Boiler counters menu [Counters]" on
page 53.
• [Alarm] - Storage of last faults that occurred in the
boiler.
See "Boiler faults menu [Alarm]" on page 53.
• [Display] - For doing the display settings.
See "Display adjustment menu [Display]" on
page 54.
EN
to display the main menu of the boiler [MENU] shown in fig. 14.
and
fig. 14- Main menu
cod. 3540000180 - Rev. 00 - 05/2023
(detail 12 - fig. 1).
again for 2 seconds; the symbol
heating buttons.
Service
Diagnostic
Counters
Alarm
Display
for 2 seconds.
after selecting the desired item.
MENU
disappears.
51