Section 11: Connect The Command Centre - Zenith HydroTap G5 Quick Start Installation Manual

Generic installation instructions
For HydroTap, mixer tap and any optional accessories, use
instructions supplied with individual kit components.
Mains power cable
Do not connect to the mains
socket until commissioning
Installation diagrams are for illustrative purposes only.
!
Hoses are not shown to scale and cannot be lengthened.
Tips for hose connection
• Push the silicone hose over the
connector for a minimum of 15mm.
• Ensure there is a constant fall from
the tap down to the command
centre.
• Hoses must be trimmed to avoid
loops and kinks. Take care when
positioning before cutting and make
a clean cut straight across the hose,
using a sharp blade.
• The hoses must not be under tension
when installed.
Quick Start Installation Guide
807118NZ v1.06 08.23 G5 BC Quick Start Guide

SECTION 11: Connect the Command Centre

USB
Tap
Command
Centre
Braided hose
HydroTap
Connections key
19