Section 2: Important Safety Instructions - Zenith HydroTap G5 Quick Start Installation Manual

Hide thumbs Also See for HydroTap G5:
Table of Contents

Advertisement

SECTION 2: IMPORTANT SAFETY INSTRUCTIONS

!
Compliance
In NZ/Australia electrical installation must comply with AS/NZS3000.
In NZ/Australia plumbing installation must comply with AS/NZS3500.
In NZ/Australia For residential chilled models, all refrigeration must comply
with AS/NZS 60335.2.24.
In the UK the system must be installed in accordance with water supply byelaws,
current IEE regulations and local authority byelaws.
Safety
This appliance is not intended for use by children under 8 years or persons
(including children under 8 years) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the appliance by
a person responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
Refrigerant
The Zenith HydroTap Command Centre range uses either HIGHLY
FLAMMABLE R290, R600a or R134A refrigerant under pressure.
Check the rating plate or contact Zenith before commencing
work.
Maintenance of the refrigeration unit must be carried out by an
accredited service provider or qualified refrigeration technician.
Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
Qualifications
To avoid hazards, all installation procedures must be carried out by a
suitably qualified tradesperson. The power cable and power outlet must be
in a safe visible position for connection.
Quick Start Installation Guide
4
807118NZ v1.06 08.23 G5 BC Quick Start Guide
!
!

Advertisement

Table of Contents
loading

Table of Contents