Section 7: Connect The Water Supply - Zenith HydroTap G5 Quick Start Installation Manual

Valves and fittings must be sealed with PTFE
!
tape if compression seals are not included.
Note: Mixer tap installations also use a 'Tee piece' as part of the water supply
plumbing connections. Refer to the Tap installation instructions supplied with
the Mixer Tap to connect the water supply if using the mixer tap option.
Note: correct strainer orientation.
Isolation valve
(not supplied)
Quick Start Installation Guide
807118NZ v1.06 08.23 G5 BC Quick Start Guide

SECTION 7: Connect the water supply

Male - Female
Strainer
(supplied)
(supplied)
Connect together
adaptor
Command Centre,
Connect to
Command Centre,
see pages 20-22
Connect to
see pages 20-22
15