Section 12: Commissioning - Zenith HydroTap G5 Quick Start Installation Manual

The HydroTap Clean process
HydroTap Clean is a first to market cleaning process for HydroTap systems
comprised of the HydroTap Clean solution, dosing adaptor and smart
firmware. The HydroTap Clean process is automated and gently cleans
the chilled and sparkling water paths during the commissioning of a new
HydroTap Command Centre.
The HydroTap Clean solution is:
Safe, natural, certified organic, PH neutral, biodegradable solution produced
by electrochemically activated water acting like a detergent.
HydroTap Clean is also non-corrosive to gently clean the chilled and sparkling
internal water paths of your new HydroTap.
Parts supplied
Parts supplied with the HydroTap Clean kit
HydroTap Clean can adapter (1) (used in filter head)
HydroTap Clean can (2)
HydroTap Clean instructions
Parts identification
!
WARNING ! Do not connect the parts together before
carefully reading/following instructions.
HydroTap Clean
adapter (1)
Quick Start Installation Guide
807118NZ v1.06 08.23 G5 BC Quick Start Guide

SECTION 12: Commissioning

UV
HydroTap Clean
can (2)
Qty
1
1
1
HydroTap Clean
instructions
23