Art ARTTRACK Installation Manual page 71

If the cascade is connected via the
troller or ART Controller/M
TRACK3 & SMARTTRACK3/M
IP address in the subnet 172.29.xxx.xxx with subnet mask 255.255.0.0.
Do not use IP addresses in the range from 172.29.0.1 to 172.29.0.20 !
Please refer to chapter 5.4.2 on page 63.
If the cascade is connected via the
(option 4, see 5.25 on page 74), all slaves must be set to a spe-
cific static IP address in the subnet 172.29.xxx.xxx with subnet mask
255.255.0.0. Do not use IP addresses in the range from 172.29.0.1 to
172.29.0.20 ! Please refer to chapter 5.4.2 on page 63.
ART Synccard3
(option 3, see 5.24 on page 73), all
slaves must be set to a specific static
ART Synccard2
5.6 Cascaded systems
of the ART Con-
SMART-
camera network
71