Art ARTTRACK Installation Manual page 159

186 Veterans Drive, Northvale, NJ 07647 USA
Delivering leading edge, innovative power solutions for over 30 years since 1984
For the following equipment: Single Port Power Over Ethernet Midspan (IEEE802.3af PoE PSE)
(Product Name)
GT-96180-1856-T3-AP
(Model Designation)
GlobTek, Inc. USA, 186 Veterans Drive, Northvale, NJ USA 07647
(Manufacturer Name and Address)
is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to
and applying the following standards:
Electromagnetic Compatibility Directive (2014/30/EU)
EMI (Electro-Magnetic Interference)
EN 55032:2015/AC:2016 Class B
Harmonic Flicker EN 61000-3-2:2014
Voltage Flicker EN 61000-3-3:2013
EMS (Electro-Magnetic Susceptibility) EN 55024:2010 and EN55024:2010/A1:2015
Low-Voltage Directive (2014/35/EU)
Information Technology Equipment EN 60950-1: 2006 (2nd Edition) A11:2009; A1:2010; A12:2011+A2:2013
Audio/video, information and communication technology equipment EN/IEC 62368-1:2014 (2nd Edition)
Energy-Related Products Directive 2009/125/EC
Ecodesign requirements for no load condition electric power consumption and average active efficiency of external power supplies
(EU)2019/1782
External a.c.. d.c. and a.c.. a.c. power supplies. Determination of no-load power and average efficiency of active modes EN
50563:2011/A1:2013
Electrical and electronic household and office equipment. Measurement of low power consumption EN50564
RoHS 2.1 / RoHS 3 Directive 2011/65/EU + Amendment (EU) 2015/863
EN 50581:2012 (RoHS Standard)
BS EN IEC 63000:2018, Technical documentation for the assessment of electrical and electronic products with respect to the restriction
of hazardous substances
This declaration is valid for products with date code February 2020 and later. The power supply described above is considered as a component and
operated in combination with an end use system. The purchaser of this power supply should conduct system level EMC/EMS testing to verify system
level conformance.
The following manufacturer is responsible for this declaration:
GlobTek, Inc USA
186 Veterans Drive, Northvale, NJ USA 07647
(Company Name and Address)
Person responsible for making this declaration:
Hans Moritz, QA Manager
(Name, Surname)
This declaration of conformity is issued under the sole responsibility of the manufacturer
Northvale, NJ USA January 29th, 2020
(Place) Date
guest 11/24/2020 10:58:26 AM GMT
www.globtek.com
EC Declaration of Conformity
On Behalf of GlobTek Inc. Signature
A.8 Declaration of conformity
your power partner
https://www.globtek.com/iso-certificates/
Page 1 of 1
159