Art ARTTRACK Installation Manual page 58

5 System setup
When using
to be connected here if you are using active targets (e.g.
stick3 ). Refer to chapter 5.8.3 on page 92 for more information.
For cascaded systems please connect
(see chapter 5.6 on page 66).
'USB port':
Please plug in all USB based peripheral devices here (e.g.
communication with
less transceivers and Yost Labs wired inertial sensors (refer to
Guide Hardware
ART Controller/M
cessing the
User's Guide
'LAN network
Please connect the
5 cable.
'Cascaded network
For cascaded systems please connect a slave controller to the
ter). Please refer to chapter 5.6 on page 66 for more detailed information.
'Power input':
Please connect the external power supply, refer to chapter A.2 on page 130 for
detailed information regarding technical specifications.
'Power output':
Please connect the optional external fan when using the
ronments with elevated temperatures.
'All other plugs &
user. Please do not connect any devices.
The ART Controller/M
ARTTRACK3
The ART Controller/M
ARTTRACK5
Watt of combined power consumption!
The ventilation hole on the back of the
covered. Ensure unblocked airflow at all times. The minimum distance
between equipment and surrounding objects has to be larger than 3
cm.
58
ARTTRACK1 –
Flystick2/2+/3
Inertial Sensors) You can also plug-in a USB pen drive for ac-
without the
Connecting to the controller
port':
ART Controller/M
port':
ports': These ports are unused and provide no functionality to the
offers synchronization output for
cameras on syncgroup #1 only !
is designed to operate with
, ARTTRACK5/C
ARTTRACK3 cameras at least one camera has
'OUT ' to 'ExtIn' of a slave controller
(refer to chapter 4.4.2 on page 34), Trivisio wire-
DTRACK3
).
to your local network using a twisted pair Cat
and TRACKPACK/E
ART Controller/M
Fingertracking
RadioTransceiver2/3
DTRACK3 User's
DTRACK3
frontend (refer to
ART Controller/M
ART Controller/M
ARTTRACK1
ARTTRACK6/M
cameras up to 140
must not be
, Fly-
for
(mas-
in envi-
–
,