Art ARTTRACK Installation Manual page 122

6 Frequently asked questions (FAQ)
Splitting of the synchronization line is not allowed.
Do not connect the cable directly to the slave controller.
2. Check the cascade settings (software issue):
DTRACK3
Go to
tached slave controllers. Please refer to chapter 5.6 on page 66.
In case of simultaneous external synchronization, please install the synchro-
nization on the master controller according to the instructions for
ARTTRACK5
page 52.
How do I guide the synchronization cables correctly in cascaded systems ?
When using one
the correct cabling would look as follows:
When using one
PACK slave controller the correct cabling would look as follows:
122
Hardware
TRACKPACK/E
and
TRACKPACK/E master and one
ART Controller
or
Cascaded System
systems. Please refer to chapter 5.2.1 on
TRACKPACK/E
ART Controller/M
and double-check the at-
ARTTRACK6/M
slave controller
TRACK-
as master and two
,