Art ARTTRACK Installation Manual page 124

6 Frequently asked questions (FAQ)
Do not connect the cable directly to the camera.
2. Check the synchronization settings (software issue):
Go to DTRACK3
ternal or external synchronization) for the synccard.
In case of external synchronization, please make sure that the synchronization
signal is being sent by the external source.
How do I guide the synchronization cables correctly in
systems (discontinued)?
When using only one syncgroup the correct cabling would look as follows:
When using two syncgroups the correct cabling would look as follows:
When using three syncgroups the correct cabling would look as follows:
124
Hardware Synccard and double-check the settings (in-
ARTTRACK 2 & 3