Art ARTTRACK Installation Manual page 69

Note: TRACKPACK
and proprietary Cat 5)
Note: ARTTRACK6/M
PACK/E are not compatible to
Option 1b - SMARTTRACK3
output 'LAN network port' of all
to the same local area network LAN or remote PC. The
TRACK3/M
slaves have to be synchronized with the master via a BNC coaxial connec-
tion, see fig. 5.22(a) on page 71.
In case of external synchronisation connect the external signal to all
SMARTTRACK3/M in the cascade using tee-connectors,see fig. 5.22(b) on page 71.
This connection option is only valid for:
master: SMARTTRACK3
SMARTTRACK3/M
SMARTTRACK3
TRACK3
Connect the external synchronisation signal to ALL
SMARTTRACK3/M
Option 2 - using the dedicated
Controller/M only) Connect the data output
to the 'Cascaded Network
nized with the master controller via a BNC coaxial connection, see fig. 5.23 on page 72).
This connection option is valid for the following combinations:
master: ART Controller
ART Controller
master: ART Controller
TRACKPACK controllers (discontinued) with
The total number of cameras in the cascaded system cannot exceed
16 for TRACKPACK/E
supported.
Please use a switch when connecting two or more
controllers to the
ART Controller/M
TRACKPACK
prietary Cat 5)
cameras are connected via two-cables (Firewire
& ARTTRACK5
& SMARTTRACK3/M
SMARTTRACK3
& SMARTTRACK3/M
& SMARTTRACK3/M
& SMARTTRACK3/M
in the cascade !
'Cascaded Network
Port' of the master. All slave controllers have to be synchro-
& ART Controller/M
& ART Controller/M
& ART Controller/M
only systems, i.e up to one slave controller is
'Cascaded Network
.
cameras are connected via two-cables (Firewire and pro-
& ARTTRACK5/C
ARTTRACK Controllers (discontinued)
only cascades Connect the data
& SMARTTRACK3/M
SMARTTRACK3
slave(s):
master can drive
slaves only !
Port' (ART Controller
'LAN network port' of the slave controller(s)
with all camera models
with TRACKPACK/E
with all camera models
TRACKPACK
Port' of the
5.6 Cascaded systems
& TRACK-
(master & slave(s))
& SMART-
SMARTTRACK3
SMARTTRACK3
SMART-
SMARTTRACK3 &
and ART
slave(s):
cameras
slave(s):
cameras (discontinued)
TRACKPACK slave
ART Controller or
69
&
&