Main unit
•
The main unit has built-in temperature, humidity and atmospheric
pressure sensors. Therefore, the unit should not be positioned where
it might be affected by heat from heaters, cookers, fireplaces or other
sources of heat.
•
Avoid placing the unit next to objects such as metal window frames as
this may interfere with reception.
Using the table stand:
Extend the stand (31) located on the back.
Wall mounting:
Put a screw into the wall and hang up the main unit using the wall bracket (30).
Sensors
•
Put the sensor in a location that is protected from direct sunlight and rain.
•
Mount the outdoor sensor at least 1.5 m above ground level, if possible.
•
Put a screw in the wall and hang the sensor up using the wall bracket (41).
Using the weather station
Settings
1.
In normal mode, press and hold [ MODE] (33) for 3 seconds to enter
settings mode.
2.
Press [ UP ] (36) or [ DOWN ] (37) to change a value. Confirm each step
by pressing [ MODE ].
If none of the buttons is pressed within 10 seconds, the settings are saved
and the weather station reverts to normal display mode.
Choose the following settings in this order:
-
Language: Display language for days of the week (English, French,
German, Italian, Spanish, Danish and Dutch)
-
Button Sound: Select whether a sound should be emitted when you
press a button.
-
Year: Set the year.
-
MD/DM: Set which order the day and month are displayed in.
-
Month: Set the month.
-
Day: Set the day.
8