Installation Sensors; Main Unit; Battery Operation - Clas Ohlson S5045NH Manual

Sensors
40. Display, show temperature,
relative humidity and
channel set (CH1, CH2,
CH3)
41. Wall bracket
42. Battery compartment
43. Channel selector
Installation
Sensors
• Before the sensors can be paired with the main unit they must be set to
transmit on different channels.
• We recommend that the sensor that you intend to put outdoors is set
to transmit on channel 1 so that the weather station can provide as
accurate a weather forecast as possible.
1. Slide the sensor battery cover downwards.
2. Set the channel selector of the first sensor to position 1, the selector
of the second sensor to position 2 and the third to position 3.
3. Insert 2 x AAA/LR03 batteries into the battery compartment,
following the markings on the bottom of the compartment.
4. Slide the battery cover back on until it clicks into place.

Main unit

The main unit of the weather station can operate from batteries or from
the mains using the mains adapter that is included.

Battery operation

1. Remove the battery cover (35) from the back of the main unit.
2. Insert 3 x AAA/LR03 batteries, following the markings on the bottom of
the battery compartment.
3. Refit the battery cover.
40
6
41
42
43