Installation, mounting
Weather Station
•
Select a location for the weather station where it is not exposed to direct
sunlight.
•
Check that the weather station is able to receive signals from the sensor
transmitter before completing the final installation. If the signal is weak,
choose another location.
•
The weather station has holes in the back for hanging, use these for wall
mounting.
•
The weather station also has a table stand on the back, for mounting it
on table or desk tops.
Sensor
•
Select a location for the sensor where it is not exposed to direct sunlight
or rain.
•
The sensor has holes on the backside for hanging, use these for wall
mounting.
Preparing the weather station
Power Supply
•
Connect the supplied adaptor to the outlet marked DC6V on the
backside of the device and then to a wall outlet.
•
Open the battery cover on the backside of the device and insert
x LR6/AA batteries (not included), according to the markings
on the battery compartment.
Setting the time and calendar
1. Press and hold to set the clock.
2. Use ▲ and ▼ to select 12 or 24 hour display. Press CLOCK to confirm.
. Repeat step 2 to set hours, minutes, year. Order of display for date/
month or month/date, month, date and EXIT (setting done). Press
CLOCK to confirm when the date is set. The clock returns to time
display.
6