Graco 3A1339 Instructions Manual page 29

50:1 Grease Models
Maximum working pressure
Fluid pressure ratio
Air operation range
Air consumption (at 100 psi)
Pump cycles per pound (cycles per kg)
Maximum recommended pump speed
Recommended speed for optimum pump life 60 cycles per minute or lower flow rate; 1.3 pounds per minute
Wetted parts
Sound pressure level†*
Sound power level‡*
Performance curve
Approximate weight
Dimensions
† Calculated at a distance of 1 meter from measurements taken per ISO 9614-2 @ 100 psi air pressure (6.89 bar,
0.68 MPa) and 20 cycles per minutes.
‡ Measured per ISO 9614-2 at 100 psi air pressure (6.89 bar, 0.68 MPa) and 20 cycles per minute.
* Muffler 112933 can be ordered separately for reduced sound levels.
3A1334D
7500 psi (517 bar, 51.7 MPa)
50:1
20 to 150 psi (1.37 to 10.3 bar; 0.137 to 1.03 MPa)
See Performance Curve, page 31
47 cycle per pound (103 cycle per kg)
120 cycles per minute
(0.6 kg per minute)
steel, brass, nitrile rubber, polyurethane, UHMWPE, acetal
72.9 dB(a)
82.0 dB(a)
See chart page 31
35 pound drum - 11.2 pounds (5.1 kg); 120 pound drum - 15.0
pounds (6.8 kg); 400 pound drum - 170.0 pounds (7.7 kg)
See illustration below
Technical Data
29