Huawei SmartLogger3000 Configuration Manual page 26

SmartLogger3000
Export Limitation Configuration Guide
1、The intermediate relay uses a 12 V drive coil, the contact supports 250 V AC @
10 A or higher, and the relay is installed with a base and guide rail.
2、The intermediate relay and external power adapter are configured by the
customer and are not provided by Huawei.
●
Figure 4-2
After switch-off is complete, check whether the circuit breaker is OFF.
●
Figure 4-3
After switch-on is complete, check whether the circuit breaker is ON.
Issue 04 (2022-10-24)
NO TICE
Switch-off control test:
Switch-on control test:
Copyright © Huawei Technologies Co., Ltd.
4 Circuit Breaker Control
21