Huawei SmartLogger3000 Configuration Manual page 16

SmartLogger3000
Export Limitation Configuration Guide
●
Issue 04 (2022-10-24)
Parameter
Switch-off with
0% power limit
Switch-off
control port
Switch-on
control port
Switch-off state
feedback port
Switch-on state
feedback port
Empirical Parameters
Meter Power
Model Lowering
Adjustment
Period
UMG 0.5s
COUNTIS 0.5s
E43
Copyright © Huawei Technologies Co., Ltd.
3 Configuting Export Limitation Feature
Value Range Default Value
Enable/Disable Disable
No/DO1/DO2/D No
O3
No/DO1/DO2/D No
O3
No/DI1/DI2/DI3/ No
DI4
No/DI1/DI2/DI3/ No
DI4
Maximum
Protection Time
3s
3s
Description
Enables or
disables DO
switch-off. The
default value is
Disable. When
enabled and the
power is limited
to 0%, the DO
performs the
corresponding
action (the hold
time is 5
seconds) if the
current reverse
flow does not
disappear after 5
seconds.
Set the Switch-
off control port
based on actual
cable connection.
Set the Switch-
on control port
based on actual
cable connection.
Set the Switch-
off state
feedback port
based on actual
cable connection.
Set the Switch-
on state
feedback port
based on actual
cable connection.
Description
11