Enco Di Ng Alti M Eter I Nputs - Honeywell BENDIX/KING KAP 140 Maintenance Manual

2.15 ENCODING ALTIMETER INPUTS
The FCC uses the encoding altimeter inputs to calibrate data from the pressure sensor, yielding
an absolute pressure altitude. The baro--correction term can be input either remotely with an
analog voltage from the altimeter or via the inc/dec knobs on the FCC. If remote control is selected,
the knobs will not be allowed to change baro correction.
Revision 2, Dec/2002
CS:15574F02.IDU
BENDIX/KING
KAP 140
Page 2--21