Table of Contents
Advertisement
4-30
The hardware monitoring features for temperatures, fans and voltages will occupy the I/O address
from 294H to 297H. If you have a network adapter, sound card or other add-on cards that might use
those I/O addresses, please adjust your add-on card I/O address, to avoid the use of those addresses.
4-9. Load Fail-Safe Defaults
When you press <Enter> on this item you get a confirmation dialog box with a message similar to:
Pressing "Y" loads the BIOS default values for the most stable, minimal-performance system operations.
4-10. Load Optimized Defaults
When you press <Enter> on this item you get a confirmation dialog box with a message similar to:
Pressing "Y" loads the default values that are factory settings for optimal performance system operations.
4-11. Set Password
Set Password: Can enter but do not have the right to change the options of the setup menus. When you
select this function, the following message will appear at the center of the screen to
assist you in creating a password.
Type the password, up to eight characters in length, and press <Enter>. The password typed now will
clear any previously entered password from CMOS memory. You will be asked to confirm the password.
Type the password again and press <Enter>. You may also press <Esc> to abort the selection and not
enter a password.
To disable a password, just press <Enter> when you are prompted to enter the password. A message will
confirm the password will be disabled. Once the password is disabled, the system will boot and you can
enter Setup freely.
NF7/NF7-M/NF7-S
Note
Load Fail-Safe Defaults (Y/N)? N
Load Optimized Defaults (Y/N)? N
ENTER PASSWORD:
Chapter 4
Advertisement
Table of Contents
