Table of Contents
Advertisement
3-20
Figure 3-9A/B shows the NF7/NF7-M/NF7-S back panel connectors, these connectors are for connection
to outside devices to the motherboard. We will describe which devices will attach to these connectors
below.
(16). PS/2 Keyboard Connector
(17). PS/2 Mouse Connector
Attach a PS/2 mouse to this 6-pin Din-connector.
(18). Parallel Port Connector
This parallel port is also called an "LPT" port, because it usually connects to the printer. You can connect
other devices that support this communication protocol, like an EPP/ECP scanner, etc.
NF7/NF7-M/NF7-S
Figure 3-9B. NF7-M back panel connectors
Attach a PS/2 keyboard connector to this 6-pin Din-connector.
If you use an AT keyboard, you can go to a computer store to
purchase an AT to ATX converter adapter, then you can
connect your AT keyboard to this connector. We suggest you
use a PS/2 keyboard for best compatibility.
Chapter 3
Advertisement
Table of Contents
