Table of Contents
Advertisement
Introducing the BIOS
4-3. Advanced BIOS Features Setup Menu
In each item, you can press <Enter> at any time to display all the options for this item.
Advanced BIOS Features Setup Menu has already been set for maximum operation. If you do not
really understand each of the options in this menu, we recommend you use the default values.
Virus Warning:
This item can be set to Enabled or Disabled, the default setting being Disabled.
When this feature is enabled, if there is any attempt from a software or an application to access the boot
sector or the partition table, the BIOS will warn you that a boot virus is attempting to access the hard disk.
Quick Power On Self Test:
After the computer has been powered on, the BIOS of the motherboard will run a series of tests in order
to check the system and its peripherals. If the Quick Power on Self-Test feature is enable, the BIOS will
simplify the test procedures in order to speed up the boot process. The default setting is Enabled.
First Boot Device:
When the computer boots up, the BIOS attempts to load the operating system from the devices in the
sequence selected in these items: floppy disk drive A, LS120, ZIP100 devices, hard drive C, SCSI hard
disk drive or CD-ROM. There are ten options for the boot sequence that you can choose (The default
setting is Floppy.):
Floppy ( LS120 ( HDD-0 ( SCSI ( CDROM ( HDD-1 ( HDD-2 ( HDD-3 ( ZIP100 ( LAN
( Serial ATA ( Disabled ( Back to Floppy.
Figure 4-4. Advanced BIOS Features Setup Upper Screen
Attention
4-11
User's Manual
Advertisement
Table of Contents
