Kenwood DP-R893 Instruction Manual page 9

mM Listening from the desired track
1 Ensure that the CD player is in the TRACK mode.
e lf the indicator is lighted, press the [P. MODE] key.
2 Select the desired disc.
Continue pressing until the
desired track No. appears.
@ The selected track number and play indicator willlight up, and the |
track will start to play.
@ When the [4 ]key is pressed once during play, the track starts |
again from the beginning.
TIME DISP. key
P.,MODE key
Dise selector keys (DISC 1 ~ DISC 5)
Search keys
(<<) .[>>)})
TIME DISP. key
Skip keys
([He=<}, [>> ))
To fast forward and backward
@ The track will start to play from where you release the key.
Tracks can be selected directly using the numeric keys on a KENWOOD
amplifier/receiver remote control by connecting the CD player to the
amplifier/receiver using a system control cord.
For more details, please refer to your amplifier or receiver instruction
manual.
Press the[ TIME DISP.] key when you want to check the elapsed time and remaining time of the track being played. Every time the [TIME DISP.
key is pressed, the displayed time changes as shown below.
The time information display may not appear when playing a CD containing 21 or more tracks. In such a case, the display will snow "-—-—-".
During randorn play or programmed play, display will show SINGLE TIME only.
SINGLE/TOTAL TIME display SINGLE TIME
TIME DISP.
ee == TOTAL TMG
23:45 alles
Elapsed time of
the track being
Time display examples
SINGLE TIME TOTAL TIME TOTAL TIME
Remaining time
of the track being
played
Elapsed time of
the whole CD
Remaining time
of the whcle CD
DP-R8g3 {En} 9