Kenwood DP-R893 Instruction Manual page 17

Hide thumbs Also See for DP-R893:

Maintenance

HM Beware of condensation

When water vapor comes into contact with the surface of cold

material, water drops are produced.

if condensation occurs, correct operation may not be possible, or the

unit may not function correctly.

This is not a malfunction, however, and the unit should be dried.

{To do this, turn the POWER switch ON and leave the unit as it is for

several hours.)

Be specially careful in the following conditions.

@ When the unit is brought from a cold place to a warm place, and

there is a large temperature difference.

@ When a heater starts operating.

@ When the unit is brought from an air - conditioned place to a place

of high temperature with high humidity.

@ When there is a large difference between the internal temperature

of the unit and ambient temperature,

or in conditions where

condensation occurs easily.

M@ Note related to transportation and movement

Before transporting or moving this unit, carry out the following

operations.

1. Turn the power ON but do not load a disc.

2. Wait a few seconds and verify that the display shown appears. Wait

further a few seconds.

3. Turn the power OFF.

TRACK NO.

$18

(TO

19 20

DP-R893 (En) 17