Kenwood DP-R893 Instruction Manual page 15

CHECK key
P.MODE key OPEN/CLOSE key
CLEAR key STOP key
PLAY/PAUSE key
M To check the edited contents M@ To record an edited program
The CCRS recording function may be used by connect-
ing the CD player to any KENWOOD cassette deck with |
an"O@ " mark, using a system control cord. :
if connected to a cassette deck that is able to relay |
recording, material edited using the EDIT-1 and EDIT-2
keys can be continuously recorded. For details please
refer to "Recording of CD playback" section in your
cassette deck instruction manual.
Press the CHECK key.
indicator lights up.
@ The CCRS double-speed recording function may be used when
decks that are made to handle twice normal speed dubbing are |
used,
e@ VVhen connected to a single deck or one way deck, this function
may prove to be partially unusable.
Omar] ae oe
Il 6 7 @ 8 19
1 $72 1% #14 «#168
O©DOO® (ee eee
CCRS display
@ Every time the |CHECK] key is pressed, the track Nos. are
displayed in the edited order.
@ This function can be used only after pressing the[STOP]key.
M To play an edited program @ To clear the edited contents
Press either of these keys.
eq
@ The play starts in order from the first track in file A and then
pauses at the beginning of file B.
® To listen to file B, press the key again.
@ Edited material will be completely cleared by just pressing the
lOPEN/CLOSElkey.
Notes:
1. While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, or the
last track on side A or side B may be cut short.
2. Up to a maximum of 20 tracks can be edited using this function.
3. The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music.
DP-R893 (En) 15