Kenwood DP-R893 Instruction Manual page 10

Programmed play (PGM mode)
The program mode allows you to play desired tracks in the order you want to hear them. A maximum of 20 selections can
be entered in memory.
M@ Playing desired tracks in desired order
1 Press the STOP key. 4 Start playback.
| 2 Enter the PGM mode. @ |f one of the skip keys ([mPi] or [Ke] ) is pressed during pro- |
grammed playback, the track being played is skipped in the |
forward or reverse direction.
P.MQDE _
indicator lights up.
hcipate e c w eal To check the programmed order
&s * @ & 10
$1 92°12 #14 «#18
GG0660 | R00 66006
indicator lights up.
GHECK
Example: Select track 5 on DISC 4. : = | re
@ Select the disc. : O2@2O00u! P-je
Display showing program No. 12, DISC 3, track
No, 7.
Osc 1
@ Everytime the CHECK]key is pressed, the track No. and the order
it was programmed (P-No.) are displayed in the order of pro-
gramming.
e@ The previous display will resume in a few seconds.
To resume normal playback
@) Press the P.MODE key.
P.MODE
Cc Biinks
SINGLE Tite
Nty Cea
be
©@e0005 P-O}
Track number
@ The playback in the order of the track Nos. on CD will start after
the track being played.
To stop programmed playback
e When selecting tracks using the numeric keys on the remote
control of the amplifier/receiver, the key does nothave
to be pressed after the tracks have been selected.
® Byrepeating steps@ @ @, up to twenty tracks may be selected.
@ |f you made a mistake, press the[(CLEARIkey and select the
correct track,
@ By pressing the key without selecting track numbers,
all the tracks on the disc selected in step CD will be programmed.
CPE) 4° 2 42 4 4
ples ceeehien Tr 2 i
44 12 12 4 15
@e@eAL i eS eee
10 pp-re93 (En)