Kenwood DP-R893 Instruction Manual page 16

Timer operations
The unit has the timer stand-by function.
With this function and commercially-available audio timer, playback can be started at the desired time.
@ Connect each unit's power cord to the SWITCHED outlet of i
ae e — Amplifiers co !*
the SWITCHED outlet.
@ Refer to the instruction manual of the timer.
2 Turn on the amplifier and the unit.
3 Insert a disc and set the starting time of the timer.
@ Set the timer while the unit and the amplifier are ON.
e@ Playback starts at the set time.
@ Be careful of the volume setting of the amplifier. (The loud sound may damage the speakers.)
Note:
When operating the unit other than CD player using an audio timer, be sure to remove the disc from the CD player.
16 pDp-R993 (En)
"lt
|