Kenwood DP-R893 Instruction Manual page 6

System connections
Make connection as shown below. When connecting the related system components, refer also to the instruction manuals
of the related components.
Do not plug in the power lead uniil all connections are completed.
AC voltage selector switch
(Except for some areas)
System control connection
When connected to an amplifier or receiver having KENWOOD
SYSTEM CONTROL terminals, system operation such as remote
control is made possible. For details, refer to the instruction manual
of the amplifier or receiver.
If your amplifier or receiver is not equipped with the SYSTEM CON-
TROL terminals, do not connect anything to any SYSTEM CONTROL
terminals.
Do not connect the unit in any system configuration other than
specified,
@ Be sure to insert the system control cord plugs fully into the
SYSTEM CONTROL terminals.
@ If the system control cord and audio cords are not connected
properly, the automatic system governing remote control and
system functions will not operate.
Notes:
1. Connect all cords firmiy. If connections are loose there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet.
Plugging/unplugging connection cords without removal of the power cord can cause malfunctions or darmage to the unit.
M@ Disc handling precautions
Handling Cleaning
Hold compact discs so that you do not If fingerprints or foreign matter be-
touch the playing surface. come attached to the disc, lightly
se me wipe the disc with a soft cotton cloth
(or similar} from the center of the disc
=< Fiaying side
Do not attach paper or tape to either the P. Storage
playing side or the label side of compact When a disc is not to be played fora
discs. long period of time, remove it from
the CD player and store it in its case.
6 DP-R893 (En)