Walk Mode - Trek TQ Drive System Quick Start Manual

Walk mode

Give yourself a little push if you have to walk your bike up a hill. Keep in mind, your gear affects the
walk speed and torque. You can enable/disable WALK mode in SETUP mode (see page 7).
• High gear — use for flat ground (faster walk speed)
• Low gear — use for hills (more torque)
Enter WALK mode.
Press
WARNING: Do not use walk mode if the bike is off the ground
Only use WALK mode when you are walking your bike. Never use walk assistance when the
wheels are not touching the ground (for example, a bike stand). The wheel can spin and you
could get injured in the moving parts.
Press and hold the UP button to activate walk assistance.
Exit WALK mode (four options).
Press Pedal
EN-6
NOTE: WALK mode is only
available with the remote
type above.
Leave idle for 30
seconds