Page 1
Garmin and Wahoo computers. NOTES: Instructions may vary depending on your computer and model. Trek recommends reviewing the pairing instructions that came with your device prior to use. The two examples are on the opposite side of this page.
Page 2
1. Make sure both the Garmin computer and the Trek CarBack Radar are charged and your computer is powered on. 2. Turn on the Trek Carback with a 1 second hold. You are now in pairing mode. 3. Make sure your Trek CarBack Radar is within range (check your computer manual for appropriate distance).
Page 3
CarBack on after unplugging. When unplugging the CarBack after charging, turn NOTE: Make sure your CarBack light is on. Not the CarBack off if the fuel gauge is still on. Press and hold the power button for 1 all computers work the same. Check your bike second to power down.
Page 4
Recycling If you need help not offered by this manual, talk to your Trek retailer or visit trekbikes.com. Please recycle the CarBack with the battery. In the US you can find out where to do this at www.call2recycle.org. Industry Canada Compliance...
Need help?
Do you have a question about the CarBack and is the answer not in the manual?
Questions and answers