Table of Contents
Advertisement
Turning the auto loudness function
'on and off
(only when the DPH9300 is connected)
Press and hold LOUD button [f3} for 2 seconds or
longer. "A. LD" lights in the display, and the auto
loudness function is turned on. Press and hold
LOUD button [13] again for 2 seconds or longer to
turn the auto loudness function off.
@ Adjusting the auto loudness function
The amount of compression can be adjusted (be-
tween 0 to 10) without changing the loudness.
1. Press DSP button [16] so that "DSP" flashes in
the display.
2. Press ADJ button [15].
3. Select up or down using o-selector [2] to se-
lect "A. LD ADJ", then push in a-selector [2].
4. Select up or down to adjust the setting using
o-selector [2].
5. Press ADJ button [15].
DSP and Equalizer Operations
Equalizer Functions
Turning the equalizer effect on and
off
Press and hold EQ button [17] for 2 seconds or
longer to turn the equalizer effect on and off.
When the equalizer effect is on, "EQ B" or "EQ U"
lights in the display.
Selecting the equalizer setting
1. Press FUNC button [1] to select the desired
mode.
2. Press EQ button [17] so that "EQ" flashes in
the display.
3. Press BAND button [11] and select the group
including the desired sound. The group
changes as follows each time BAND button
[ti] is pressed:
"EQ B" (BASIC) -> "EQ U" (USER) -> "EQ B"
(BASIC) ...
<Equalizer settings>
B-1. BASS BOOST:
Low frequencies empha-
sized
B-2. HIGH BOOST: Medium and high frequen-
cies emphasized
B-3. ACOUSTICAL:
Medium frequencies (vo-
cals) emphasized
sized
B-5. SMOOTH: Soft, relaxed sound
B-6. FLAT: The original sound
Editing the equalizer settings
1. Select the preset equalizer setting to serve
as a base.
3. Press ADJ button fig].
ARX8470R/ARX9470RW
27
Advertisement
Table of Contents
