Table of Contents
Advertisement
Radio Operations
Manual tuning
There are two ways available: quick tuning and
step tuning.
While you are in step tuning mode, the channel
is sought for step by step; while you are in quick
tuning mode, the channel is rapidly sought for.
1. Press BAND button [11] to select a band.
2. When "MANU?" is lit in the display, manual tun-
ing is available.
lf "MANU?" is not lit in the display, press and
hold BAND button [14] for 2 seconds or longer
to light it up.
3. Tune in to a station.
@ Quick tuning:
Press left or right and hold a-selector
[2] for 1
second or longer.
@Step tuning:
Press left or right.
+ "MANU" disappears from the display 7 seconds
after manual tuning, and seek tuning becomes
available.
Recalling a preset station
Preset tuning is a function for storing stations to
Preset buttons (1 to 6) which enables you to se-
lect a station by pressing the corresponding pre-
set button.
1. Press BAND button [it] to select a band.
2. Press one of Preset buttons
to select a
stored station.
Note:
* Press and hold Preset button [12] for 2 seconds or
longer to store the station currently being received
(preset memory).
Manual memory
Up to 24 stations (6 each for the FM1, FM2, FM3
and AM (MW/LW) stations) can be preset in the
Preset buttons.
1. Press BAND button [ti] to select a band.
2. Select left or right to tune in to a desired sta-
tion using a-selector [2].
3. Press and hold one of Preset buttons [12] for 2
seconds or longer to store the station currently
being received.
Auto store
_Auto store is a function for storing up to 6 sta-
tions that are automatically tuned in sequentially.
Notes:
© The only FM band that can store stations is FM3.
If you try to store stations in FM1 or FM2, the sta-
tions will automatically be stored in FM3.
e When the auto store is performed, the station pre-
viously stored in the memory at that position is
overwritten.
;
¢ /f there are fewer than 6 stations with good recep-
tion, the stations previously stored at the remain-
ing Preset butions are not overwritten.
¢ A station already stored in one of Preset buttons
cannot be stored in another Preset buttons.
1. Press BAND bution [11] to select a band (FM3
or AM) of the desired station.
2. Press and hold AS button [7] for 2 seconds or
longer. The stations with good reception are
stored automatically to Preset buttons [12].
Preset scan
This function scans through each preset station
for 7 seconds sequentially.
This is useful when you want to search for a de-
sired station.
Note:
° Take note that if you press and hold PS button
for 2 seconds or longer, the auto store function
goes into effect and the unit starts storing stations.
1. Press PS button [7].
2. When a station that you want to listen to is
tuned in, press PS button [7] again or the cor-
responding Preset button [12] to stop preset
scan.
* A station that cannot be tuned in to is skipped
and the next preset station is tuned in.
ARX9470R/ARXS8470RW
1 3
Advertisement
Table of Contents
