Entering Titles - Clarion ARX9470R Owner's Manual

Other Handy Functions
Cellular input
When the unit is connected to a cellular telephone
via cable sold separately, the voice from the tele-
phone can be heard from the speaker of unit.
Each time you press No.5 of the Direct buttons
12| while holding down BAND button [11], the cel-
lular input toggles between "TEL SP-R",
"TEL SP-L", "TEL MUTE" and "TEL off'.
* The factory setting is "TEL off".
@TEL SP-R:
Even if the power is turned on or off to the main
unit, sound is heard from the front right speaker.
@TEL SP-L:
Even if the power is turned on or off to the main
unit, sound is heard from the front left speaker.
@TEL MUTE:
The sound of the unit is muted when the tele-
phone is used.
@TEL off:
The sound of the unit is not muted when the tele-
phone is used.
Note:
® This function is available only when the phone mute
lead of the unit is connected to the specified lead
of the cellular telephone.
Entering titles
Titles can be given to CDs.
* Up to 100 titles can be entered.
1. Play the CD to which you want to give a title in
the CD changer and press TITLE button [14].
Cl =e <s
ma OPOTOTR GD TREEGEET
FEEL INPUT
#7 BCE FIGHT OTE
2. Select left or right to move the cursor using
o-selector [2].
* Up to 11 characters can be entered.
3. Press DISP button [6] to select a character
list used to enter characters. Each time you
press this button, the character list changes
as follows:
Capital letters -» Numbers -® Umlauts and
accented letters -» Small letters -» Symbols
~> Capital letters...
4. Select up or down to select the characters us-
ing a-selector {2].
24 ARX39470R/ARXS470RW
5. Repeat steps 2, 3 and 4 to enter a title.
* When more than the specified number of titles
are entered, "TITLE FULL" appears in the display.
6. Push in a-selector [2] for 2 seconds or longer
to store the title. The previous mode display
returns after the title is stored.
Clearing titles
1. Select the CD changer mode and press and
holding TITLE button [14] for 2 seconds or longer.
Se POIsc)
2. Select up or down to select a title to be cleared
using «-selector [2].
3. Push in a-selector [2] for 2 seconds or longer
to clear the title. The next title appears. If you
want to clear the next title too, repeat steps 2
and 3.
* When all the stored titles are cleared,
"NO TITLE" appears in the display.
4. After clearing the title, press TITLE button
to return to the previous mode display.