Equalizer Functions - Clarion ARX7370R Owner's Manual

DSP and Equalizer Operations
Turning the auto loudness function
on and off
(only when the DPH9300 is connected)
Press and hold LOUD button [13] for 2 seconds or
longer. "A. LD" lights in the display, and the auto
loudness function is turned on. Press and hold
LOUD button [13] again for 2 seconds or longer to
turn the auto loudness function off.
@ Adjusting the auto loudness function
The amount of compression can be adjusted (be-
tween 0 to 10) without changing the loudness.
1. Press DSP button [16] so that "DSP" flashes in
the display.
2. Press ADJ button [15].
3. Select up or down using a-selector [2] to se-
lect "A. LD ADJ", then push in a-selector [2].
4. Select up or down to adjust the setting using
a-selector [2].
5. Press ADJ button [15].
Equalizer Functions
Turning the equalizer effect on and
off
Press and hold EQ button [17] for 2 seconds or
longer to turn the equalizer effect on and off.
When the equalizer effect is on, "EQ B" or "EQ U"
lights in the display. :
Selecting the equalizer setting
1. Press FUNC button [1] to select the desired
mode.
2. Press EQ button [17] so that "EQ" flashes in
the display.
3. Press BAND button [11] and select the group
including the desired sound. The group
changes as follows each time BAND button
[11] is pressed:
"EQ B' (basic) - "EQ U" (user) > "EQ B" (ba-
sic) ...
4. Use Direct buttons [12] to select the desired
equalizer setting.
<Equalizer settings>
B-1. BASS-BOOST: Low frequencies empha-
sized
B-2. HIGH-BOOST: Medium and high frequen-
cies emphasized
B-3. ACOUSTICAL: Medium frequencies (vo-
cals) emphasized
B-4. IMPACT: Low and high frequencies empha-
sized
B-5. SMOOTH: Soft, relaxed sound
B-6. FLAT: The original sound
Editing the equalizer settings
1. Select the preset equalizer setting to serve
as a base.
2. Press EQ button [17] so that "EQ" flashes in
the display.
3. Press ADJ button [15].
4. Select up or down to select the desired ad-
justment using a-selector [2], then push in o-
selector [2].
5. When "EQ EDIT", "EQ MIN Fo', "SUB
WOOFER' or "P. EQ" has been selected, se-
lect left or right using a-selector [2] to select
the parameter to be adjusted.
6. Select up or down to adjust the setting using
a-selector [2].
ARX7370R/ARX7370RW 27