Disabled System Indicator (Dsi) - Kenwood KDC-4009 Instruction Manual

tr Reali re ot epee ET ee oR SC NAD IR IE
Disabled System Indicator (DSI)
A red indicator will blink on the unit after the faceplate is
removed, warning potential thieves. The factory default for
this function is ON.
Turning Disabled System Indicator On/Off:
1 Turn the power of the unit off.
2 While pressing buttons #1 and #3 at the same time, press the
TUN button.
Repeat steps 1 and 2 above to turn DSI back on.
The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Removing the Faceplate:
Press the release button.
The faceplate is unlocked, allowing you to detach it.
« The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate
in its special storage case while detached.
* Do not expose the faceplate or its storage case to direct sun-
light or excessive heat or humidity. Also avoid places with too
much dust or the possibility of water splashing.
Reattaching the Faceplate:
1 Align the projections on the unit with the grooves on the face-
plate.
2 Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use the unit.
ot da