Kenwood KDC-4009 Instruction Manual page 16

CD player features (See page 9)
Function of Remote (See page 10)
Direct Track Search
Using the remote, directly input the track number that you
want to listen to.
1 Using the number buttons on the remote, input the number of
the track that you want to listen to.
The selected track number will blink in the display for 10 sec-
onds.
If you make no further input in the 10-second period, the num-
ber entry mode will automatically be canceled.
2 Press either the TRACK+ or TRACK— button while the track
number is blinking.
The track starts playing.
Canceling Direct Track Search While It ls Operating:
Press the ® fl button.
You cannot use the direct track search function while doing track
scans or using random play.
Track Repeat
Repeat playing the track currently being listened to.
Turning Repeat Play On/Off.
Press the REP button to switch repeat play on and off.
The REP indicator lights up when repeat play is turned on.
The track number currently being heard blinks in the display.
Repeat play is canceled when you stop playing the disc.
Turning Track Scan On/Off:
Press the SCN button to switch track scan on and off.
The SCN indicator lights up when track scan is turned on.
The first 10 seconds of each track will be played, in order.
The track number currently being heard blinks in the display.
Stopping to Listen to the Track Being Scanned:
Press the ®&l or SCN button again to stop the scan and keep
on listening to a track normally.
* Track scan is canceled when you stop playing a disc.
¢ Track scan only scans each track on a disc once.
Play all the tracks on the current disc in random order.
1 Press the RDM button to switch random play on and off.
The RDM indicator lights up when random play is turned on.
The track number will change over and over in the display as
the next track is being selected.
When the track has been selected, play will begin.
The selected track number blinks in the display as it is being
played.
Random play is canceled when you stop playing a disc.