Inventory - Grizzly G0775 Owner's Manual

Inventory

The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
-12-
Main Components (Figure 3)
A. Sander Assembly ....................................... 1
B. Magnetic Switch Pedestal .......................... 1
C. Miter Gauge ................................................ 1
D. Open-End Wrench 10x13mm (Not Shown) 1
E. Radius Sanding Attachment (Not Shown) .. 1
F. Hex Wrenches 2.5, 5mm (Not Shown) ..1 Ea
A
C
Figure 3. Model G0775 inventory.
Model G0775 (Mfd. Since 11/14)
Qty
B