Name Of Parts; Setting Up & Operating The Station - Aktakom ASE-1107 Instruction Manual

Name of Parts

Setting up & Operating the station
CAUTION! The sponge is compressed. It will swell when moistened with water.
Before using the unit, dampen the sponge with the water and squeeze it dry.
Failure to do so may result in damage to the soldering tip.
A. Iron Holder
1. Small Cleaning Sponge
Dampen the small cleaning sponge with water and
then squeeze it dry.
Place it in one of the 4 openings of the iron holder
base.
2. Add water to approximately the level as shown. The
small sponge will absorb water to keep the larger
sponge above it wet at all times.
Note:
The large sponge may be used alone without
small sponge & water).
3. Dampen the large cleaning sponge and place it at the iron holder base.
CAUTION!
Be sure to turn off the power switch before connecting or disconnecting the soldering iron.
Failure to do so may result in damage to the station.
2