Aktakom ASE-1116 User Manual

5.2 High Temperature
The temperature of the soldering tip will reach as high as around
400°C (752°F) when the power switch is on. Since mishandling may
lead to burn and fire, be sure to comply with the following precautions:
• Do not touch metallic parts near the soldering tip.
• Do not use this system near the flammable items.
• Advise other people in the work area that the unit can reach a very
high temperature and should be considered potentially dangerous.
• Turn off the power switch while taking breaks and when finishing
using.
• Before replacing parts or storing the system, turn off the power and
let it cool down to the room temperature.
5.3 Take care of your soldering station
Do not use this tool for any applications other than soldering or
desoldering.
Do not rap the iron against the work bench or otherwise subject the
iron to severe shocks.
Do not file the soldering tip to remove the oxide, please wipe the tip
on the cleaning sponge. Use only accessories or attachments which
are listed in the operation manual. Use of other tools and other
accessories can lead to a danger of injury.
Please turn off the power before connecting or disconnecting the
soldering iron.
5.4 Maintenance
Before further use, safety devices or slightly damaged parts must be
carefully checked for error-free and intended operation. Inspect
moving parts for error-free operation and that they don't bind, or
whether any parts are damaged. Damaged safety devices and parts
must be repaired or replaced by a qualified technician, so long as
nothing else is indicated in the operation manual.
5.5 Keep children at a distance
Do not allow other persons to touch or disturb the soldering tool or
power cord. Keep other persons away from the work area. Unused
soldering tools should be stored in a dry location which is out of the
reach of children. Switch off all unused soldering tools.
5.6 Protect yourself against electrical shocks
Avoid touching grounded parts with your body, e.g. pipes, heating
radiators and so on. The grip of antistatic designed soldering tool is
conductive.
5.7 Work environment
Do not use the soldering tool in a moist or wet environment. The
soldering iron should be placed on the holder after finished using.
5.8 Observe the valid safety regulations at your work place.
www.tmatlantic.com
SOLDERING STATION
Thank you for choosing AKTAKOM soldering
4
ASE-1116
User's Manual
station.
www.tmatlantic.com