Related Manuals for Aktakom ASE-1112
Summary of Contents for Aktakom ASE-1112
- Page 1 ASE-1112 Temperature Controlled Soldering Station INSTRUCTION MANUAL www.tmatlantic.com...
-
Page 2: Safety Instructions
On first use the soldering iron may produce smoke, this is just grease used in manufacturing burning off, it is not harmful to the product or user. Safety Instructions The construction of the soldering station meets Protection Level I. Ensure the earth conductor is not disconnected and the product is only connected to earthed sockets. -
Page 3: Operation
Do not touch any other area but the handle when the soldering iron is working. It is very hot! Do not leave children alone in the presence of the soldering iron. Soldering must be done on non-combustible surfaces. Make sure any material in the vicinity can not be damaged by the heat. - Page 4 Always put the soldering iron on the holding rack when it is heating up or during breaks from soldering. Make sure the contacts for soldering on the work place are clean. Only use solder for electronics. Acidic solder can damage the soldering tip or the work piece.
-
Page 5: Maintenance
CAUTION! Handle the heated soldering iron with extreme care, as the high temperature of the iron can cause fires or painful bums. The first time you use the soldering iron, it may smoke slightly as the heating element dries out. This is normal and should onty last for approx. -
Page 6: General Cleaning
GENERAL CLEANING The outer case of the iron or station may be cleaned with a damp cloth using small amounts of liquid detergent. Never submerse the unit in liquid or allow any liquid to enter the case of the station. Never use solvent to clean the case. The appliance is not a toy, and must be kept out of children’s hands.