1. Manuals
  2. Brands
  3. Aktakom Manuals
  4. Soldering Gun
  5. ASE-1203
  6. Operation and maintenance manual

Aktakom ASE-1203 Operation And Maintenance Manual

Intelligent lead free soldering station 2 in 1
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ASE-1203
Intelligent Lead Free Soldering Station
2 IN 1
OPERATION and MAINTENANCE MANUAL
Thank you for purchasing a lead free soldering station. It is designed
for lead free soldering. Please read this manual before operating the
unit. Store this manual in a safe, easily accessible place for future
reference.
www.tmatlantic.com

Advertisement

Table of Contents
loading

Related Manuals for Aktakom ASE-1203

Summary of Contents for Aktakom ASE-1203

  • Page 1 ASE-1203 Intelligent Lead Free Soldering Station 2 IN 1 OPERATION and MAINTENANCE MANUAL Thank you for purchasing a lead free soldering station. It is designed for lead free soldering. Please read this manual before operating the unit. Store this manual in a safe, easily accessible place for future reference.

  • Page 2: Table Of Contents

    TABLE CONTENTS Safety Instruction………………………………………………………1 1. Summary…………………………………………………………….2 2. Specifications………………………………………………………..3 3. Setting & Operating the Unit………………………………..………3 3.1 Usages of the Sponge and the Iron Holder………………………3 3.2 Connections…………………………………………………..…4 3.3 Temperature Setting……………………………………………4 3.4 Sound Setting………………………………………………..…5 3.5 Sleeping……………………………………………………..…6 3.6 Calibrating the Iron Temperature………………………………6 4. Parameter Setting……………………………………………….…7 4.1 Password Setting…………………………………………….…7 4.2 Sleeping Setting…………………………………………….…9 5.

  • Page 3: Safety Instruction

    Safety Instruction WARNING WARNING: Misuse may potentially cause death of, or serious injury to the user. CAUTION: Misuse may potentially cause injury to the user or physical damage to the objects involved. For your own safety, be sure to comply with these precautions. CAUTION When the power is on, the tip temperature is very high.

  • Page 4: Summary

    Don’t use or stop the use if the appliance is damaged, especially the supply cord. This machine is equipped with a 3-wires grounding plug and must be plugged into a 3-terminal grounded socket. Do not modify plug or use an ungrounded power socket.

  • Page 5: Specifications

    2. Specifications 9. Tips Power 90W *2 Temperature range 80℃~480℃ Max Ambient Temperature 40℃ Temperature Stability ±2℃/Without air flow and no load Tip to Ground Resistance <2Ω ?4.7 Tip to Ground Potential <2mv Heating Element Electromagnetic heater Power Cord Assembly 1.4m 1-99min Sleeping time...

  • Page 6: Connections

    1. Turn the unit ON and set the temperature control knob to highest. Then 1. Dampen the small cleaning sponge with water and then squeeze it dry. Place wiggle and kink the iron cord at various locations along its length, including it in the iron holder base.

  • Page 7: Sound Setting

    Temperature rising: Press“▲” key directly. If so, the setting temperature will raise 1℃ and the display window will display the set temperature. When loosen the “▲”key, the display window will delay the set temperature about 2 seconds. If within 2 seconds, press the “▲”key again, the setting temperature will raise 1℃...

  • Page 8: Sleeping

    Heater error: If power can’t be sent to soldering iron, the display H - E 3.5 Sleeping window will show “H-E”. This indicates the possibility of a heater malfunction. 1. When the station is in the setting menu status, the display will be show “OK”. Press the “▲”and“▼”keys at the same time to enter in the sleeping time.

  • Page 9: Parameter Setting

    4. At the moment, the digit of LED display temperature is flashing. Press the 2. Wrap rosin core solder (φ0.8mm diameter or larger) around the newly “▲” and “▼” keys to input the value on the thermometer and then press the exposed iron surface, insert the tip into the handle, and turn on the power “ON/OFF”...
  • Page 10 selecting the password of three digit, press the“ON/OFF”button. 6.2.1 Inspect and Clean the Tip The input password is error 5. If the iron enters into normal work state after display shows the current Caution: Never file the tip to remove oxide. setting temperature for two seconds, this indicates the input password is 1.

  • Page 11: Sleeping Setting

    6. Use and maintain 4.2 Sleeping Setting 6.1 Care and Use of the Tip 1. When the window displays , press “▲” and “▼” buttons at the same Tip’s temperature time, the window displays the current sleeping time, which means the soldering iron has been into the sleeping time setting mode.

Table of Contents