ETC ColorSource Spot VXT Installation Manual page 3

ETC Installation Guide
ColorSource Spot VXT
WARNING:
this luminaire is not user-replaceable, and must be replaced
only by a qualified technician. Contact ETC Customer
Support for assistance.
AVERTISSEMENT :
source lumineuse de ce projecteur n'est pas remplaçable
par l'utilisateur et ne doit être remplacée seulement par un
technicien qualifié. Contactez le service client ETC pour
obtenir de l'assistance.
WARNING:
earthed (grounded).
AVERTISSEMENT :
L'appareil doit être mis à la terre.
CAUTION: Possibly hazardous optical radiation emitted from this
product. Do not stare at operating lamp. May be harmful to the
eyes.
CAUTION:
outdoors, use only Neutrik
TRUE1 TOP connectors. Outdoor use of the ColorSource
Spot VXT with other connectors that are not IP65-rated will
void the ETC warranty.
Note:
• DMX 512 connections must be Class 2.
• To ensure that cumulative leakage current on control wiring
does not exceed 3.5 mA, connect no more than 32 fixtures
on a single DMX run.
ColorSource Spot VXT
RISK OF ELECTRIC SHOCK! The light source in
RISQUE DE DÉCHARGE ÉLECTRIQUE! La
RISK OF ELECTRIC SHOCK! The device must be
RISQUE DE CHOC ÉLECTRIQUE!
When using the ColorSource Spot VXT
RISK GROUP 2
®
TOP XLR and powerCON
Page 3 of 16
®
ETC