Advertisement
Mounting to a Concrete or Brick Wall
1b
1
Hold the marking template (D) provided against the wall where you want to install your TV,
mark four holes for drilling.
Choose two holes on each side.
TIP
Then, mark four holes on the wall using thetemplate provided.
B
60mm
0mm
(2.4")
(2. ")
ø 10mm
(ø 3/8")
2
Using a power drill and a 3/8" masonry drill bit, drill mounting holes of 3/8" (10 mm) diameter
and 2.4" (60 mm) depth at the marked locations in the previous step.
5
D
Marking Template
Wall Plate
NOTE
Do NOT use power drill and do NOT over tighten the lag bolts.
B
Wall Plate
3
Place concrete anchors (W-B) in each hole. Tap each anchor flush with the wall using a hammer.
Using a socket wrench, mount the wall plate (B) and fasten them with the provided lag bolts
(W-A) and D6 washers (W-C).
WARNING
Installers must verify that the supporting surface will safely support the combined
weight of the equipment and all attached hardware and components.
W-C
W-B
W-A
6
Advertisement
