10.
If it is necessary to remove or replace the HD camera, lift the LVDS cable that routes on top of the
module (1), disconnect the cable from the camera (2), and then peel the silver tape up (3) to remove the
module from the enclosure (4).
The HD camera is available using spare part number L44539-001.
11.
If it is necessary to remove the display assembly from the computer:
a.
Disconnect the display cable from the system board (1).
b.
Disconnect the antennas from the WLAN module (2) (select models only).
c.
Disconnect the antennas from the WWAN module (3) (select models only).
d.
Remove the four Torx T8 2.5×4.0 screws (4) that secure the display assembly to the computer.
60
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts